Logic Gate Calculator

Omni's logic gate calculator allows you to determine the output of various logic gates. You can also use this logic gate calculator to generate the truth table for various logic gates.

Whether you are a DIY person or an expert in electronics, logic gates are the most basic thing you should be acquainted with.
Continue reading if you want to know what a logic gate is. We'll also discuss various types of logic gates and the operations they can perform.

First order of business - get familiar with binary conversions and bitwise operations. Our binary converter and bitwise calculator can help you in this regard.

A logic gate is a digital circuit that acts as a gate (or switch) for the flow of information (electric signal). It either allows or stops signals, depending upon whether certain logical conditions are satisfied or not.

A logic gate can have one or more inputs, through which it accepts digital signals. The output signal depends upon whether the input signals are on/high (1) or off/low (0) and the type of logical operation performed by the gate.

Logic gates are the basic building block of every digital system, including your computer. We can find them in almost every electronic circuit, for example, microprocessors, microcontrollers, alarms, streetlights, etc.

There are three basic logic gates:

• AND gate: The AND gate gives a high (1) output only when all of its inputs are high (1). Figure 1 shows the logic symbol of the AND gate with A and B as inputs.

The Boolean expression for the AND logic gate is A ⋅ B = Output,
where the multiplication sign (⋅) refers to AND in Boolean algebra. Learn more about this with our binary multiplication calculator.

• OR gate: The OR gate gives a high (1) output when either of its inputs is high (1). Figure 2 shows the logic symbol of the OR gate.

The Boolean expression for the OR logic gate is A + B = Output,
where the addition sign (+) is referred to as OR in Boolean algebra. More on this is available in our binary calculator.

• NOT gate: The NOT gate inverts the input, i.e., if the input is high (1), the output is low (0), and vice-versa. It is a single input and single output device. Figure 3 shows the logic symbol of the NOT gate.

The Boolean expression for the NOT logic gate is $\rm{\overline{A} = Output}$,
where the bar sign (‾) is NOT in Boolean algebra.

We can combine the basic logic gates (AND, OR, and NOT) to get many complex gates. A few popular combinations are:

• NAND gate: A NAND (or NOT-AND) gate is a combination of an AND gate and a NOT gate, i.e., the output is low (0) only when all of its inputs are high (1). Figure 4 shows the logic symbol of the NAND gate.

The Boolean expression for the NAND logic gate is

• NOR gate: A NOR (or NOT-OR) gate is a combination of an OR gate and a NOT gate, i.e., the output is high (1) only when both of its inputs are low (0). Figure 5 shows the logic symbol of the NOR gate.

The Boolean expression for the NOR logic gate is

• XOR gate: A XOR (or exclusive-OR) gate results from combining OR, AND, and NOT gates. The output of an XOR logic gate is high (1) when either of the inputs is high (1). Figure 6 shows the logic symbol of the XOR gate.

The Boolean expression for the XOR logic gate is $\rm{A \cdot \overline{B} + \overline{A} \cdot B = Output}$, or

• XNOR gate: The XNOR gate is a combination of an XOR gate and a NOT gate. The output of an XNOR logic gate is high (1) when both of the inputs are high (1) or when both of the inputs are low (0). For further reading on XOR logic, head to our xor calculator

Figure 7 shows the logic symbol of the XNOR gate. The Boolean expression corresponding to the XNOR logic gate is

If you are interested in more complex logical operations like bit shift, we recommend checking out the bit shift calculator.

A truth table shows all possible input combinations and the corresponding output combinations for a logic gate. The truth table for various logic gates is shown below.

Let us generate a truth table for the NOT gate using the logic gate calculator.

1. Using the drop-down menu, select NOT gate.
2. The calculator will display the input A and the symbol of NOT gate.
3. Use the radio buttons to select the input A (0 or 1).
4. You will get the corresponding output value.
5. Play with all possible input combinations to generate corresponding outputs so that you can create your own NOT truth table.

As you can see, determining the outcome of any logic gate is a piece of cake with our calculator!